Picture of Four de refusion NOMOS (A-INTE)
Current status:
AVAILABLE
Book | Log
Show/Collapse all

1st Responsible:
2nd Responsible:
You must be logged in to view files.


La mini-machine de brasage par refusion entièrement automatique TYR108C est un équipement idéal pour la production de petits lots et de variétés multiples dans les petites et moyennes usines électroniques et pour la recherche scientifique et la production dans certaines entreprises électroniques et instituts de recherche scientifique. équipements supplémentaires dans les lignes de production SMT à moyenne et grande échelle.


The mini fully automatic reflow soldering machine TYR108C is an ideal equipment used for the small-lot and multi-variety production in small- and medium-scale electronic factories and for the scientific research and production in some electronic enterprises and scientific research institutes, and also supplementary equipment in medium- and large-scale SMT production lines. 
 

Tool name:
Four de refusion NOMOS (A-INTE)
Area/room:
Integration/Assemblage (Bât G1/G)
Category:
Integration/ Device mounting
Manufacturer:
Madell
Model:
TYR108C

Spécifications:

  • Number of temperature control segments: 1-128; up to 8*16 segments of program can be set and stored in the reflow soldering machine according to practical needs.
  • Number of temperature zones: Single zone with multiple temperature segment control.
  • Temperature control system: Automatic temperature control using microcomputer; non-contact SSR output.
  • Accuracy of temperature: ±1°C.
  • Temperature rise time: 90s to enter into temperature keeping zone.
  • Temperature range: Room temperature to 300°C.
  • Heat source: Infrared + hot air convection.
  • Effective area of work bench: 350mm*250mm (larger than A4 paper), on which maximum size 350mm*250mm of PCB can be put.
  • Soldering time:  6min±1min.
  • Temperature curve: 1-8 pieces of temperature curve can be set in the reflow soldering machine according to needs. User can select the temperature curve according to the accuracy for product soldering. There are four default pieces of curve, e.g. leaded, lead-free, cure etc. in the machine for selection. Cure 1: about 90s for temperature keeping at 150°C; cure 2: about 5 min for temperature keeping at 150°C.
  • Cooling system: Cross-flow type balanced rapid cooling.
  • Rated voltage: Single phase AC 220V, 50Hz.
  • Rated power: 4.2KW; average power: 1.5kW.
  • Separate air exhausting duct for cooling: The ON/OFF of air duct is automatically controlled through the electric controlled door to effectively ensure the airtightness of hot room.
  • Weight: 45kg.
  • Outside dimensions: 620(L)*460(W)*385(H)mm.
  • External RS232 interface, input of K-type thermocouple, drive for solid state relay, cooling signal and ringing signal. 

Instructors

Licensed Users

You must be logged in to view tool modes.